HandyTone-496 User Manual Grandstream Networks, Inc.
20
DHCP IP Lease Time:
Value is set in units of hours. Default value is 120hr (5 Days.) The time IP
address are assigned to the LAN clients
DMZ IP:
Forward all WAN IP traffic to a specific IP address if no matching port is
used by HandyTone-496 itself or in the defined port forwarding.
Port Forwarding: Allow users to forward a matching (TCP/UDP) port to a specific LAN IP
address with a specific (TCP/UDP) port.
In addition to the Basic Settings configuration page, end users also have access to the device Status
page. The following is a snap shot of the device Status page. Details will be explained next.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS FXS PORT1 FXS PORT2
MAC Address: 00.0B.82.03.C8.AF
WAN IP Address: 192.168.1.187
Product Model: HT496
Software Version: Program-- 1.0.3.18 Bootloader-- 1.0.8.9 HTML-- 1.0.3.18 VOC-- 1.0.0.10
S
y
stem Up Time: 2 day(s) 0 hour(s) 9 minute(s)
Re
g
istered: Yes
PPPoE Link Up: disabled
NAT: detected NAT type is full cone
All Rights Reserved Grandstream Networks, Inc. 2005
MAC Address The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.
WAN IP Address This field shows WAN port IP address.
Product Model This field contains the product model info.
Software Version Program: This is the main software release, its number is always used for
firmware upgrade.
Bootloader: This is normally not changed.
HTML: This is the web user interface, normally not changed.
VOC: This is the codec program, normally not changed.