
HandyTone-496 User Manual Grandstream Networks, Inc.
Layer 3 QoS: 48 (Diff-Serv or Precedence value)
Layer 2 QoS: 802.1Q/VLAN Tag 0 802.1p priority value 0(0-7)
STUN server is : stun.mycompany.com (URI or IP:port)
keep-alive interval: 20 (in seconds, default 20 seconds)
Use NAT IP: (used in SIP/SDP message if specified)
F
irmware Upgrade and
Provisioning: Upgrade Via TFTP HTTP
Firmware Server Path: fm.grandstream.com/gs
Config Server Path: fm.grandstream.com/gs
Firmware File Prefix: Firmware File Postfix:
Config File Prefix: Config File Postfix:
Automatic Upgrade:
No Yes, check for upgrade every 1008
0
minutes (default 7 days)
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
F
irmware Key: (in Hexadecimal Representation)
F
XS Impedance: 600 Ohm merica)(North A
Caller ID Scheme: Bellcore (North America)
Onhook Voltage: 36V
Polarity Reversal: No Yes (reverse polarity upon call establishment and termination)
NTP Server: time.nist.gov (URI or IP address)
Reply to ICMP on WAN port: No Yes (Unit will not respond to PING from WAN side if set to No)
WAN side http access: No Yes (WAN side access to http server will be rejected if set to
No)
Syslog Server:
Syslog Level: NONE
Update Cancel Reboot
All Rights Reserved Grandstream Networks, Inc. 2005