Grandstream Networks HT502 CONFIGURATION GUIDE

Grandstream Networks, Inc. HT-502 User Manual Page 14 of 31

Firmware 1.0.0.29 Last Updated: 01/2007

CONFIGURATION GUIDE

DHCP MODE: Select voice menu option 01 to enable HT–502 to use DHCP.

STATIC IP MODE: Select voice menu option 01 to enable HT–502 to use STATIC IP mode, then use

option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

FIRMWARE SERVER IP ADDRESS: Select voice menu option 13 to configure the IP address of the firmware

server.

CONFIGURATION SERVER IP ADDRESS: Select voice menu option 14 to configure the IP address of the

configuration server.

UPGRADE PROTOCOL: Select voice menu option 15 to choose firmware and configuration upgrade

protocol. User can choose between TFTP and HTTP.

FIRMWARE UPGRADE MODE: Select voice menu option 17 to choose firmware upgrade mode among the

following three options: 1) always check, 2) check when pre/suffix changes, and 3) never upgrade

WAN PORT WEB ACCESS: Select voice menu option 12 to enable WAN Port Wed Access of the device

configuration pages.