Grandstream Networks HT502 CONFIGURING HT502 WITH WEB BROWSER

Grandstream Networks, Inc. HT-502 User Manual Page 15 of 31

Firmware 1.0.0.29 Last Updated: 01/2007

CONFIGURING HT–502 WITH WEB BROWSER

HT–502 has an embedded Web server that will respond to HTTP GET/POST requests. It also has

embedded HTML pages that allow users to configure the HT–502 through a Web browser such as

Microsoft’s IE and AOL’s Netscape.

The HT–502 HTML configuration menu can be accessed via LAN or WAN port:

From the LAN port:

1. Directly connect a computer to the LAN port.

2. Open a command window on the computer

3. Type in “ipconfig /release”, the IP address etc. becomes 0.

4. Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by default

5. Open a web browser, type in the default gateway IP address. http://192.168.2.1. You will see the

From the WAN port:

The WAN port HTML configuration option is disabled by default from factory. To access the HTML

configuration menu from the WAN port:

1. Enable the “WAN Port Web Access” option via IVR option 12.

2. Find the WAN IP address of the HT–502 using voice prompt menu option 02.

3. Access the HT–502 Web Configuration page by the following URI via WAN port:

http://HandyTone-IP-Address (the HT IP-Address is the WAN IP address for the HT–502).

NOTE: If using a web browser to enter the configuration page, strip the leading “0”s because the browser

will parse in octet. (i.e. if the IP address is: 192.168.001.014, please type in: 192.168.1.14).