Grandstream Networks HT702, HT704 IP Address, Dhcp hostname, Dhcp domain, Dhcp vendor class ID

Telnet Server	Default is set to YES.
IP Address	There are two modes to operate the HT70X:
	DHCP mode: all the field values for the Static IP mode are not used (even though they
	are still saved in the Flash memory.) The HT701 acquires its IP address from the first
	DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the
	PPPoE account settings. The HT70x will establish a PPPoE session if any of the PPPoE
	fields is set.
	Static IP mode: configure the IP address, Subnet Mask, Default Router IP address, 1st
	Preferred DNS Server, 2nd Preferred DNS Server, 3rd Preferred DNS Server, 4th Preferred
	DNS Server. These fields are set to zero by default.
DHCP hostname	Default is blank. This option specifies the name of the client. This field is optional but may
	be required by some Internet Service Providers.
DHCP domain	Default is blank. This option specifies the domain name that client should use when
	resolving hostnames via the Domain Name System.
DHCP vendor class ID	Default is HT7XX. Used by clients and servers to exchange vendor-specific information..
PPPoE account ID	PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol
	over Ethernet) connection.
PPPoE password	PPPoE account password.
PPPoE Service Name	Default is blank. This field is optional. If your ISP uses a service name for the PPPoE
	connection, enter the service name here.
Preferred DNS server	The preferred DNS Server to be used
Time Zone	Controls how the date/time is displayed according to the specified time zone.

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 27 of 52