Gravely 927060-1028, 927062-1232, 927064-1440 , FILLING FUEL TANK, , OPERATING MOWER, STOPPING IN AN EMERGENCY, , STARTING AND SHUTTING OFF ENGINE

GB - 10

Throttle Lever (Item 3)

Move throttle lever to

CHOKE to start a cold

engine.

Move throttle lever to

FAST position to

increase engine speed.

Move throttle lever to

SLOW position to

decrease engine speed.

Forward and Reverse Pedal (Item 2)

Press front of pedal

down to move unit

forward.

Press rear of pedal

down to move unit

backward.

Remove foot from pedal

to return unit to neutral

and to stop the unit.

Parking Brake (Item 7)

Fully depress parking

brake (1) and engage

parking brake lever

(2).

PTO Switch (Item 4)

Engages and disengages

the attachment. Pull switch

to engage; push switch to

disengage.

Mower Lift Lever (Item 10)

Raises and lowers the mower deck. See

Specifications

on page 25 for height

adjustments.

FILLING FUEL TANK

1. Clean fuel cap and surrounding area to

prevent dust, dirt, and debris from

entering fuel tank.

2. Remove fuel cap.

IMPORTANT:

See Engine Manual for correct

type and grade of fuel.

3. Fill fuel tank to 1/2 in. (1.3 cm) below

bottom of ﬁller neck. See

Specifications

on page 25 for fuel tank capacity.

4. Replace fuel cap

STOPPING IN AN EMERGENCY

Remove foot from forward and reverse pedal

and press on parking brake.

STARTING AND SHUTTING OFF ENGINE

Starting Engine

NOTE:

PTO must be disengaged prior to

starting engine.

1. Set throttle lever to CHOKE for a cold

engine. Set throttle lever at 1/3 throttle for

a warm engine.

IMPORTANT:

DO NOT operate starter for

more than 15 seconds per minute as damage

can occur.

2. Depress brake pedal.

3. Turn ignition key to START position and

release once engine has started.

4. After engine starts, set throttle lever to

FAST position.

IMPORTANT:

Let engine warm up several

seconds to several minutes depending on

outside temperature.

NOTE:

When engine is running, PTO belt is

turning electric clutch on mower deck. The

electric clutch WILL NOT engage mower

blades until PTO switch is engaged.

Shutting Off Engine

1. Stop unit.

2. Disengage PTO.

3. Set throttle lever to SLOW.

4. Set parking brake.

5. Turn ignition switch to OFF position and

remove ignition key.

OPERATING MOWER

1. Start engine.

2. Set throttle lever FAST.

3. Engage PTO to start mower blades.

4. Use forward and reverse pedal to move

unit.

5. Disengage PTO to stop mower blades.

CHOKE

FAST

SLOW

OA0002

OL0009

OA0008

OA0006

01607000

OA0080