Gravely 985114 - 16 HP, 985115 - 8.5 HP, 985117

TOOLS REQUIRED

Phillips Screwdriver, Needle Nose Pliers, Open-End

Wrench: 3/8, 7/16, 9/16 & 3/4 and or Adjustable

Wrench

REMOVE UNIT FROM CARTON

Remove the unit and components from the shipping

container.

ASSEMBLY

Position Handlebar

1. Disconnect Ignition Harness.

2. Position the handlebar right side up.

3. Move the left handle of the handlebar under the

right side of the frame, across the engine and out

between the left side of the frame and the PTO

control.

4. Rotate the handlebar into the mounting position.

5. Reconnect ignition harness.

6. Retain the handlebar in position with four 3/8-16 x

1.25 bolts and locknuts and tighten hardware

(Figure 2).

7. Connect the wiring harness from handlebar to the

unit.

8. Mount the Hi-Lo gear control handle assembly

and pivot to the left handlebar with a 1/2-13 x

3.50 bolt, locknut, and washer (Figure 3).

ASSEMBLY

Figure 1

Handlebar

Assembly

Fwd-Rev

Control

Rod

Hi-Lo

Control Rod

Tractor

Assembly

Optional

Brake Handle

Assembly

Brake Rod, RH

Brake Rod, LH

DH0010

Figure 2

1. Ignition Switch

Harness

2. Ignition Switch

3. Instrument Panel

4. Control Lever

5. Handlebar (Left)

DH0020

Figure 3

1. Hi-Lo Control Handle

2. Brake Handle Grip

3. Hi-Lo Control Rod

4. Extension Rod

5. Adjust and Jam Nuts

6. Left Handlebar

DH0040