SERVICE MOWER

Checking and Adjusting Cutting Height

CAUTION: Avoid injury! Rotating blades are dangerous. Before adjusting or servicing mower:

•Remove ignition key or disconnect battery negative (-) cable to prevent engine from starting accidently.

•Always wear gloves when handling mower blades or working near blades.

Checking Thrust Arm-to-Stop Rod Clearance (Transport Position)

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Set mower deck to transport (fully raised) position.

3.Check clearance (A) from the top of the thrust arms (B) to the bottom of the thrust arm stop rod (C). The clearance should be 3 mm (1/8 in.).

Adjust Thrust Arm-to-Stop Rod Clearance (Transport Position)

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Loosen jam nut (A).

NOTE: If correct adjustment cannot be obtained by adjusting the lift handle connecting rod, further movement can be gained by adjusting the chain U-bolts.

Adjust all four chain U-bolts equally. All four chains should be tight. Tighten the U-bolt of the loose chain to correct.

3.Adjust deck lift handle connecting rod (B) while viewing adjusting mechanism from rear of machine.

•To lower deck, turn nut (C) counterclockwise.

•To raise deck, turn nut (C) clockwise. 4.Tighten jam nut (A).

Adjusting Deck Lift Assist Spring Tension

NOTE: Deck lift assist spring tension is adjusted at the factory. If the effort required to raise or lower the mower deck is not satisfactory, an adjustment may be necessary.

Check Spring Tension

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Raise the mower deck lift lever to the transport position.

3.Measure distance (A) between the washers (B) on each deck lift spring assembly.

•The recommended factory setting is approximately 1 mm (1/32 in.) gap between the spring coils at the lowest HOC setting.

Adjust Assist Spring Tension

NOTE: Do not overtighten the deck lift assist springs. If the springs are compressed too tightly, the mower deck will float too freely.

Decrease deck lift assist spring tension if operating in rough terrain.

While positioned in front of the machine:

•Turn hex nut (C) clockwise to increase deck lift spring tension and reduce the effort to raise and lower the mower deck.

•Turn hex nut (C) counterclockwise to decrease deck lift spring tension and increase the effort to raise and lower the mower deck.

Checking and Adjusting Mower Deck Drive Belt Tension

1.Park machine safely. (See Parking Safely in the SAFETY section.) 2.Adjust the mower deck for the lowest cutting height, and lower the deck. 3.Raise foot platform.

Service Mower - 37

Page 38 Page 40
Page 39
Image 39
Great Dane GCKH2348S, GCBV2361S, GCKA1952S Checking and Adjusting Cutting Height, Adjusting Deck Lift Assist Spring Tension
Page 38 Page 40

GCKA1948S, GCBR2652S, GCKH2352S, GCKH2361S, GCBV2348S specifications

The Great Dane GCBV2361S, GCKA1952S, GCBR2661S, GCKH2348S, and GCBV2348S are remarkable contributions to the world of modern appliances, celebrated for their efficiency, performance, and sleek designs. Each model embodies a commitment to technological excellence, offering a suite of features that cater to the diverse needs of users in kitchens across the globe.

The GCBV2361S is a standout model that combines a stylish stainless steel finish with user-friendly controls. It incorporates advanced cooking technologies, such as convection heating, which ensures uniform cooking by circulating hot air. This model not only enhances flavor but significantly reduces cooking times.

The GCKA1952S presents a compact yet powerful choice, ideal for smaller kitchens without compromising on performance. It features energy-efficient settings perfect for those conscious of their carbon footprint. With a smart digital display, users can easily navigate through various cooking options, while the integrated timer ensures perfect results every time.

For those looking to up their culinary game, the GCBR2661S offers professional-grade features typically found in high-end kitchens. It is equipped with multiple cooking modes, including steam and broil functions, granting users the versatility to experiment with diverse recipes. Its spacious interior and adjustable racks allow for cooking larger meals, making it perfect for family gatherings.

The GCKH2348S transitions seamlessly from multifunctional cooking to elegant serving. This model boasts self-cleaning technology, which helps maintain hygiene without the fuss, and its intuitive interface simplifies the cooking process. Additionally, its aesthetically pleasing design adds a touch of sophistication to any kitchen décor.

Lastly, the GCBV2348S combines style with cutting-edge technology, featuring Wi-Fi connectivity that allows users to control the appliance remotely via smartphone apps. This model supports voice commands for hands-free operation, further enhancing convenience in today’s fast-paced lifestyles.

In conclusion, the Great Dane GCBV2361S, GCKA1952S, GCBR2661S, GCKH2348S, and GCBV2348S represent the pinnacle of modern kitchen technology. With their innovative features, energy efficiency, and sleek designs, these appliance models are ideal for food enthusiasts and casual cooks alike, ensuring excellent results with minimal effort. Each model caters to specific needs and preferences, making them essential tools for any contemporary kitchen.
Top Page Image Contents