Manuals / Great Dane / Lawn and Garden / Lawn Mower

Great Dane GCKH2348S, GCBV2361S, GCKA1952S Neutral Creep Adjustment, Check Maximum Speed Drift

Models: GCKA1948S GCBR2652S GCKH2352S GCKH2361S GCBV2348S GCKH2348S GCBR2661S GCKA1952S GCBV2361S

1 88
Download 88 pages 6.15 Kb
Page 30
Image 30

SERVICE TRANSMISSION

Check Neutral Creep

CAUTION: Avoid injury! Engine exhaust fumes contain carbon monoxide and can cause serious illness or death.

Move the machine to an outside area before running the engine.

Do not run an engine in an enclosed area without adequate ventilation.

•Connect a pipe extension to the engine exhaust pipe to direct the exhaust fumes out of the area.

•Allow fresh outside air into the work area to clear the exhaust fumes out.

NOTE: Check and adjust motion control linkages with the machine parked on a hard, level surface.

1.Start engine.

2.Set throttle lever to full-throttle position.

3.Unlock the park brake.

4.If the rear drive wheels begin to creep, an adjustment is required.

Neutral Creep Adjustment

1.Stop engine and lock the park brake.

2.Move both motion control levers to neutral detent position (standard levers) or neutral lock position (optional “over the lap” levers).

3.Raise the rear wheels off the ground and securely support the rear of the machine.

NOTE: When tilting the seat forward, do not tilt the seat so far forward that it moves the motion control levers out of the neutral detent position.

4.Tilt operator seat forward and support the seat frame.

5.Loosen nut (A), and move the dampener (B) in adjusting slot backward or forward to stop machine creep.

•If machine creeps forward, slide dampener to the rear of the adjusting slot. Tighten nut.

•If machine creeps backward, slide dampener to the front of the adjusting slot. Tighten nut.

6.Check for creep, and if the machine still creeps, continue with the next step.

7.Remove pin (C) and disconnect swivel (D) from each traction control rod (E), and rotate the swivel.

8.Rotate swivel (D) to adjust:

•To stop forward creep, rotate each swivel (D) counterclockwise one rotation.

•To stop rearward creep, rotate each swivel (D) clockwise one rotation. 9.Connect swivel to traction control rod.

10.Repeat as needed to stop machine creep. 11.Lower seat.

12.Lower the rear of the machine to the ground. 13.Check maximum speed drift.

Check Maximum Speed Drift

1.Check neutral creep, and adjust as needed.

2.Sit on the seat, and start the engine.

3.Operate machine to bring the hydraulic oil to normal operating temperature.

4.Move the machine in a level, wide-open area, such as an empty parking lot.

5.Run the engine at full throttle.

6.Move and hold both control levers to the full forward position. Observe the machine travel. If the machine does not travel in a straight line, adjustment is required. Note the direction the machine moves.

Maximum Speed Drift Adjustment

1.Park machine safely. (See Parking Safely in the SAFETY section.)

2.Tilt operator seat forward and support the seat frame.

Service Transmission - 28

Page 29 Page 31
Page 30
Image 30
Great Dane GCKH2348S, GCBV2361S manual Neutral Creep Adjustment, Check Maximum Speed Drift, Maximum Speed Drift Adjustment
Page 29 Page 31

GCKA1948S, GCBR2652S, GCKH2352S, GCKH2361S, GCBV2348S specifications

The Great Dane GCBV2361S, GCKA1952S, GCBR2661S, GCKH2348S, and GCBV2348S are remarkable contributions to the world of modern appliances, celebrated for their efficiency, performance, and sleek designs. Each model embodies a commitment to technological excellence, offering a suite of features that cater to the diverse needs of users in kitchens across the globe.

The GCBV2361S is a standout model that combines a stylish stainless steel finish with user-friendly controls. It incorporates advanced cooking technologies, such as convection heating, which ensures uniform cooking by circulating hot air. This model not only enhances flavor but significantly reduces cooking times.

The GCKA1952S presents a compact yet powerful choice, ideal for smaller kitchens without compromising on performance. It features energy-efficient settings perfect for those conscious of their carbon footprint. With a smart digital display, users can easily navigate through various cooking options, while the integrated timer ensures perfect results every time.

For those looking to up their culinary game, the GCBR2661S offers professional-grade features typically found in high-end kitchens. It is equipped with multiple cooking modes, including steam and broil functions, granting users the versatility to experiment with diverse recipes. Its spacious interior and adjustable racks allow for cooking larger meals, making it perfect for family gatherings.

The GCKH2348S transitions seamlessly from multifunctional cooking to elegant serving. This model boasts self-cleaning technology, which helps maintain hygiene without the fuss, and its intuitive interface simplifies the cooking process. Additionally, its aesthetically pleasing design adds a touch of sophistication to any kitchen décor.

Lastly, the GCBV2348S combines style with cutting-edge technology, featuring Wi-Fi connectivity that allows users to control the appliance remotely via smartphone apps. This model supports voice commands for hands-free operation, further enhancing convenience in today’s fast-paced lifestyles.

In conclusion, the Great Dane GCBV2361S, GCKA1952S, GCBR2661S, GCKH2348S, and GCBV2348S represent the pinnacle of modern kitchen technology. With their innovative features, energy efficiency, and sleek designs, these appliance models are ideal for food enthusiasts and casual cooks alike, ensuring excellent results with minimal effort. Each model caters to specific needs and preferences, making them essential tools for any contemporary kitchen.