Sharp UX-B800 manual Setting the Reception Mode, Volume Adjustment, Speaker volume, Ringer volume

Setting the Reception Mode

•The currently set time appears (example): [TIME 12:19]

7Enter a two-digit number for the hour ("00" to "23") and a two-digit number for the minute ("00" to "59"). Example: 9:25

8 Press . [ANTI JUNK #]

STOP

9 Press to exit.

Setting the Reception Mode

The machine has three modes for receiving incoming faxes:

AUTO mode:

The machine automatically answers all calls on two rings and begins fax reception.

MANUAL mode:

All calls, including faxes, must be answered by picking up the

machine's handset or an extension phone connected to the same line.

TEL/FAX mode:

The machine automatically answers all calls on four rings. If the machine detects that a call is a voice call (including a manually dialled fax), it makes a special ringing sound to alert you to answer. If the machine detects that the call is an automatically dialled fax, it begins reception automatically.

To set the reception mode, make sure a

document is not loaded in the document feeder, and then press

RESOLUTION/

RECEPTION MODE

until the desired mode

appears in the display.

For more information on receiving faxes, see Chapter 4.

Volume Adjustment

Speaker volume

SPEAKER

1 Press .

2Press or to select

HIGH, MIDDLE, or LOW.

SPEAKER

• Press again to turn off the speaker.

Ringer volume

1Press or to select

HIGH, MIDDLE, LOW, or OFF.

SPEAKER

(Make sure has not been

pressed, the handset is not lifted, and a document is not loaded in the feeder.)

•The ringer will ring once at the selected level.

2If you selected “OFF OK ?” to turn

off the ringer, press .

14