Scan to E-mail Transmission

Scan to E-mail Transmission

Follow the steps below to send a document to an e-mail recipient.

The document will be sent as an attachment to an e-mail message.

You can specify the recipient by directly entering an e-mail address, or by selecting an address that has been stored as explained in the previous section.

1Flip up the feeder cover () and

adjust the document guides to the width of your document ().

2

1

2Insert the document face down with the top edge going in first.

Up to 20 A4-size sheets can be placed in the feeder at once.

For more information on loading the document, see page 26.

RESOLUTION/

If desired, press RECEPTION MODE to set the

resolution and contrast (see p. 27).

3Enter the destination e-mail address using one of the following methods:

Press , press

, and enter the address with the letter and number keys (p. 6). When

finished, press .

If the address has been stored in the A, B, or C key, press the key.

If the address has been stored in a Rapid Key, press the Rapid Key.

If the address has been stored in a Speed Dial number, press SPEED DIAL and enter the Speed Dial number.

To search for a stored address, press

(this eliminates stored fax numbers from the search),

press or until the name or address appears, and press

.

Note: If [CHECK E-MAIL SETTING]

appears, your SMTP server or sender address has not been entered in the e-mail settings (p. 17).

22

Page 24
Image 24
Sharp UX-B800 manual Scan to E-mail Transmission, Press , press, To search for a stored address, press