Connecting the Power Cord

Connecting the Power Cord

Plug the power cord into a 230 V,

50Hz, earthed (3-prong) AC outlet.

The power outlet must be installed near the equipment and must be easily accessible.

Caution! Remove all packing tape before plugging in the power cord

(see page 8), or damage to the machine may result.

The display will show [CHECK CARTRIDGE] until you install the print cartridge.

It is recommended that you install surge protectors for the power and telephone lines. Surge protectors can be purchased at most telephone specialty stores.

Installing the Print Cartridge

Print cartridge yield

SHARP UX-C80B replacement cartridge

Ink Save mode OFF:

Approx. 480 A4 pages

Ink Save mode ON:

Approx. 800 A4 pages

(The initial cartridge has the same yield as the replacement cartridge.)

Ink Save mode is initially turned off. To turn on Ink Save mode, see pages 49 and 53.

Caution! Do not open the cover while the machine is printing.

Note: Keep print cartridges sealed in their packages until you are ready to install them. It is recommended that you do not use a cartridge that has been left unused for a long time after opening, as the print quality may be considerably degraded.

Make sure the machine’s power cord is plugged in and paper is loaded in the paper tray.

1Open the cover (grasp the finger grip).

10

Page 12
Image 12
Sharp UX-B800 manual Connecting the Power Cord, Installing the Print Cartridge