E-mail Settings

Accessing the machine’s Web page

To access the Web page, you will need to know the machine’s host name or IP address (usually it is most convenient to use the host name).

To check the machine’s host name or IP address, follow the procedure in Checking your IP address and the connection (page 16), or print the Network Settings List (page 55).

Type in the host name or IP address of the machine in the Address bar of the Web browser on your computer.

The Web page menu will appear. Select E-mail Setup and configure the settings. For explanations of the settings, click Help in the Web page menu.

Note: If the Web page is used while the machine is in operation (except for voice calls using the handset), machine operation may become unstable.

Using the machine’s operation panel to configure the settings

Follow the steps below to display the e- mail settings, and then configure each setting as explained in the table on the next page.

FUNCTION

1Press , then until [E-MAIL SETTING] appears.

2Press , then repeatedly until the setting that you wish to configure appears.

3Press . (Note: This step is not necessary for the “FILE FORMAT” setting.)

4Enter the required information for the setting as explained in the table on the next page.

5After configuring the setting, the next e-mail setting will appear in the display. You can configure the next

STOP

setting, or press to exit.

18

Page 20
Image 20
Sharp UX-B800 manual Accessing the machine’s Web, Setting, or press to exit