Editing and clearing auto-dial numbers

To make changes to a previously stored auto-dial number, or clear a number, follow these steps:

FUNCTION

1Press , , then .

2Press the Rapid Key (or press

SPEED DIAL

and enter the 2-digit Speed

Dial number) of the number that you want to edit or clear. (You can also

press or until the

number appears and press .)

Display: [1=EDIT, 2=CLEAR]

3 Press for “EDIT” or for “CLEAR”.

If you selected “CLEAR”, go to Step 7.

4If you selected “EDIT”, make the desired changes to the number.

Press or to move the cursor to the digit or digits you wish to change, and then enter the new digit. The new digit will replace the old digit.

If you do not wish to change the number, go directly to Step 5.

5Press .

Sending a Fax: Auto Dialling

6Make the desired changes to the name.

Press or to move the cursor to the letter or letters you wish to change, and then press the appropriate letter key. The new letter will replace the old letter.

If you do not wish to change the name, go directly to Step 7.

7Press .

8Return to Step 2 to edit or clear

STOP

another number, or press to exit.

Using an auto-dial number to send a fax

1Load the document(s).

RESOLUTION/

If desired, press RECEPTION MODE to set the

resolution and/or contrast.

2Select the fax number using one of the methods below:

Rapid Key Dialling: If the number is stored in a Rapid Key, press the Rapid Key.

Sending

Faxes

3.

 

31

Page 33
Image 33
Sharp UX-B800 manual Editing and clearing auto-dial numbers, Using an auto-dial number to send a fax