Installing the Print Cartridge
11
1. Installation
2
Remove only the
tape from the new
cartridge.
•Make sure all
tape is removed.
•CAUTION!
DO NOT touch
the gold
contact area
on the
cartridge.
3
Make sure the cartridge holder is in
the position shown. Place your
fingers on top of the holder and
open the holder release.
If the display shows [PRINTER ERROR]
or [PRINTER ERROR/CHECK PAPER],
open the cover and check for jammed
paper. Remove any jammed paper (see
page 67) and close the cover.
4
Insert the new print cartridge (➊).
Close the holder (➋), making sure it
clicks into place.
•CAUTION! DO NOT touch the gold
contact area or pull on the cable.
•If you are replacing the cartridge,
remove the old cartridge. If you are
going to use the old cartridge again,
place it in an air-tight container
(containers for this purpose can be
purchased at most office supply
stores).
1
2
5
Close the cover, pressing firmly on
both front corners.
Display: [CHANGE CARTRIDGE]/
[1=NEW, 2=OLD].
6
Press (NEW) if the cartridge
you installed is new.
Display: [NEW CARTRIDGE?] /
[OK:PRESS START]
Press (OLD) if the cartridge
you installed is old.
7
Press .
If you selected "OLD" in the
previous step, this completes the
installation procedure. (Note: If you
find that print quality is not
satisfactory, see p. 58 to align the
print cartridge.)
all.book Page 11 Thursday, August 10, 2006 2:22 PM