Combination FIRE SMOKE DAMPERS
Model FSDGB-211
Application
Model
GB
Ratings | R |
| |
Standard GB | 10 m/s (2000 fpm) |
Velocity: | |
Pressure: | 1kPa (4 in. wg) |
Steel 3V Blades
Qualified to Standard GB
Greenheck Kunshan Co. Ltd. and Greenheck Fan Corporation certifies that the model
511 and comply with the requirements of the AMCA Certified Ratings Programs. The AMCA Certified Ratings Seal applies to air performance ratings only.
Standard Construction
Frame: | 127mm x 25.4 mm (5 in. x 1 in.) |
| 1.24mm galvanized steel hat |
| channel with reinforced corners. A |
| low profile head and sill are used on |
| sizes less than 432mm (17 in.) high |
| to maximize free area and |
| performance. |
Blades: | 1.24mm (16 ga.) galvanized steel, |
| reinforced with 3 longitudinal |
| structurally designed vee’s. |
Seals: | Extruded silicone rubber blade |
| seals. Flexible stainless steel jamb |
| seals. |
Linkage: | Concealed in jamb. |
Axles: | 12.7 mm (1⁄2 in.) dia. plated steel. |
Bearings: | Bronze sleeve type. |
Fusible Link: | 280° C |
Size Limitations
Minimum Size: | 204mm W x 152mm H |
Maximum Size: | (8 in. W x 6 in. H) |
| |
Single Section: | 813mm W x 914mm H |
| (32 in. W x 36 in. H) |
Multiple Section: | 1626mm W x 914mm H |
| (64 in. W x 36 in. H) |
Optional Features
•Stainless steel bearings
•OCI (Open closed indication switches)
•Retaining Angles
•Transitions (C, O, R)
•Sealed transitions and sleeves
•Sleeve with integral flange on both sides
*W & H dimensions furnished approximately 6mm (1/4 in.) undersize.
(Add sleeve thickness for overall sleeved damper dimension)
Right hand drive is shown. Left hand drive is available upon request.