Application Data
Damper Sideplate and Sleeve Dimensional Data
The drawings below illustrate the factory standard sideplate and sleeve mountings for the
If space constraints are a problem the "A" dimension can be varied between 5 3⁄8 in. (136mm) and 12 in. (305mm).
Sideplate |
|
| Sleeve | 3 38mm max | |
|
|
|
| ||
| in. (mm) | "A" Dimension |
|
| |
| Standard | Maximum |
|
| |
|
|
|
| ||
| All Dampers* | 7 3/16 in. (183) | 12 (305) |
|
|
| When Height is | 12 (305) | 12 (305) | 95mm |
|
|
|
| |||
| 11 in. (279) or less |
|
|
|
|
| with OCI |
|
|
|
|
| 152mm. |
|
|
|
|
| *With the exception of dampers 10 in. high (254mm) or less. | Varies |
| ||
| NOTE: Entire damper frame is not required to be installed |
| |||
| 137mm |
| |||
| within the wall. |
|
|
|
|
| 127.mm |
|
| A |
|
A |
|
|
| 127mm | |
* |
|
|
|
| |
|
|
|
|
| |
| 305mm |
|
| Sleeve Length | |
|
|
|
| ||
| T* | Space Envelopes Required for | |||
| S | ||||
|
| Actuators and Accessories |
| ||
|
| Externally mounted actuators always require space outside | |||
|
| of the damper sideplate or sleeve. The “S” dimension | |||
|
| illustrates the clearance required for various available | |||
|
| actuators. |
|
| |
|
| On dampers less than 18 in. (457mm) high, actuators | |||
|
| may also require clearances above and/or below the | |||
|
| sideplate or sleeve. “B” and “T” dimensions are worst case | |||
|
| clearance requirements for some dampers less than 18 | |||
|
| in. (457mm) high. All damper sizes under 18 in. (457mm) | |||
|
| high do not require these worst case clearances. If space | |||
|
| availability above or below the damper sleeve is limited, | |||
|
| each damper size should be individually evaluated. |
B*
Actuator |
| B* |
| T* | S |
Type/Model |
|
|
|
|
|
| With OCI |
| With OCI |
| |
|
|
|
| ||
|
|
|
|
|
|
|
| 120 Volt AC |
|
| |
|
|
|
|
| |
ML4XXX Series Honeywell | 5 | 1/4 in. (133mm) |
| 3/4 in. (19mm) | 6 in. (152mm) |
|
|
|
|
| |
MS4XXX Series Honeywell | 6 in. (152mm) |
| 3/8 in. (10mm) | 6 in. (152mm) | |
|
|
|
|
| |
MS4120 Series Honeywell | 6 in. (152mm) |
| 3/8 in. (10mm) | 6 in. (152mm) | |
|
|
|
|
|
|
|
| 24 Volt AC |
|
| |
|
|
|
|
| |
ML8XXX Series Honeywell | 5 | 1/4 in. (133mm) |
| 3/4 in. (19mm) | 6 in. (152mm) |
|
|
|
|
| |
MS8XXX Series Honeywell | 6 in. (152mm) |
| 3/8 in. (10mm) | 6 in. (152mm) | |
|
|
|
|
| |
MS8120 Series Honeywell | 6 in. (152mm) |
| 3/8 in. (10mm) | 6 in. (152mm) | |
|
|
|
|
| |
|
| Pneumatic (psi) |
| ||
|
|
|
| ||
1 in. (25mm) |
| 6 1/4 in. (159mm) | 6 1/2 in. (165mm) | ||
|
|
|
|
|
|
2 | 3/8 in. (60mm) |
| 12 1/8 in. (308mm) | 9 1/4 in. (235mm) | |
|
|
|
|
|
|
3 | 3/4 in. (95mm) |
| 16 1/2 in. (419mm) | 10 in. (254mm) | |
|
|
|
|
|
|
* For dampers 18 in. (457mm) or more in height these dimensions are 0 in. .