Recording and Monitoring Audio
You’re ready to start recording with Final Vinyl. You may use any audio device you choose; here, we use a turntable as an example.
1.Press the Record button; Final Vinyl will start recording. If you wish to monitor the incoming audio, click the “Playthrough/ Monitor” button. The Playthrough button works whether you are recording or not.
2.Start your turntable and place the needle on the record. While recording, the waveform window will turn red and the Record button will blink. The elapsed time of your current recording session will be displayed in the Time/Location indicator.
3.To stop recording, press the flashing Record button again. Final Vinyl will then calculate and draw the waveform, a visual representation of your audio signal. The longer the recording, the longer the calculation will take, so be patient!
4.If you wish to record both sides of an album as one continuous file, after the first side has finished, press Final Vinyl’s Record button to stop recording. Turn the record over, press the Record button, and start the turntable again. Final Vinyl will automatically continue recording where the other side left off.
