Identification
A.Delay Time Dial
B.Sensitivity Dial
C.Battery Compartment
D.View Window
E.Variable Shade Dial
F."ON" Switch
G.Solar Cell
H.Sensor
Delay Time
This feature allows you to control how soon the auto lense reverts back to the #4 shade condition after you have stopped welding. This can be very important when the puddle remains very bright momentarily.
Sensitivity
You can control how sensitive the sensors are to the arc light. We recommend that the dial be set in the middle position for most applications.
Battery Compartment
The helmet uses 2 AAA size batteries which are installed in this compartment. If the helmet is to be stored for an extended time, remove the batteries to avoid damage to the compartment.
View Window
This window is set to #4 shade when off or when the sensors are not exposed to strong light.
Shade Dial
Adjustments can be made to the amount of shad- ing the view window provides. The range is from #9 to #13 shade.
"ON" Switch
Push this button once to turn on the auto darken- ing feature on the helmet. The helmet will turn off automatically 15 minutes after the sensors have been exposed to bright light.
Solar Cell
A
B
C
D
Figure 2. View of the inside control panel.
E
F
Figure 3. View of the left side of helmet.
G
H
H
D
