Cowon Systems COWON D2 user manual Timer, General, Recording, FM Radio, Information

18Basic Operations

4.Timer

1.Time Setup

·Sets the current time.

·Sets the correct time setting for alarm and scheduled recording.

2.Wakeup mode

·Automatically turns on the player at the specified wakeup time.

·Music Alarm plays music and for FM Alarm settings, the last station to be listened to will run in Radio mode.

·For FM recording, it records the last radio frequency from the preset time during the specified time. NOTE: FM Scheduled Recording uses more power than other features. Always make sure that the player is

fully charged before using this feature.

3.Wakeup Time

·Sets the time to automatically turn the player on.

·Once sets the alarm for one time use, Daily sets the alarm for daily use.

·Duration is the period of time during which the alarm will stay on.

4.Sleep

·Automatically turns off the power after a specified time.

·After the preset time has passed, the player will automatically turn off even if a file is being played at the time.

5.Auto Off

·When the player is stopped and no action is taken after a specified time has elapsed, this feature will auto- matically turn off the player.

·This function does not operate during playback.

5. General

1. Skip length
· Sets the length of playback time skipped when the	buttons are pressed shortly.
2. Scan speed
· Sets the speed of Fast Forward/Rewind when the	buttons are pressed and held.

·The faster the speed, the quicker scanning is possible.

3.Resume

·Saves the location of the music file played at the last power off.

·If enabled, when the player is turned on, it automatically plays from the last position where it was turned off.

4.Fade in

·Gradually increases volume when resuming playback after stop or pause.

·Sets how long it takes to increase the volume.

5.Load Default

·User can define a desired function for Pressing and holding button

6. User defined button

·User can define a desired function for Pressing and holding button

Basic Operations 19

6. Recording

1.LineIn bps

·Sets the audio quality of the file being recorded through Line-In.

·The higher Kbps, the better the recording quality is, but file size also becomes larger.

2.Voice bps

·Sets the audio quality of the file recorded with the built-in microphone.

·Files recording through the microphone are set to Mono by default.

·The higher Kbps, the better the recording quality is, but file size also becomes larger.

3.FM bps

·Sets the quality of the file being recorded during FM Radio listening.

·Also sets the quality of scheduled FM recording file.

·The higher Kbps, the better the recording quality is, but file size also becomes larger.

4.Mic volume

·Adjusts the volume level of audio recorded through the built-in microphone.

5.Line volume

·Adjusts the volume level of audio recorded through the Line-In.

6.Auto Sync

·Recognizes input sound through the Line-In and generates a new file automatically.

·If there is no sound input during a specified time period, a new file is created when recording is resumed.

7.External MIC

·Sets whether an external microphone is being used.

·External microphone does not need separate power. Line-in Cable Converter (sold separately) can be used

7.FM Radio

1.Stereo

·Select from Stereo and Mono when listening to FM Radio.

·Radio broadcasts that only support Mono will not support the Stereo feature.

2.Auto scan

·Automatically scans for FM frequency channels and sets to preset channels.

3.Region

·Selects the country in which you are listening to FM radio.

8.Information

·Version : version of the firmware installed

·Total Space : Total capacity of the flash memory

·Free Space : Un-used amount of flash memory

COWON D2 COWON D2