Note: If TIME ON disappears before you finish setting the hour and minute, start again from Step 1.
3.Press CLOCK until TIMER OFF and the last set end time appear.
4.Press 
MIN and 
HOUR (or TUNING 
and 
on the re- mote control) to set the end time.
Note: If TIMER OFF disappears before you finish setting the hour and minute, start again from Step 3.
5.Slide FUNCTION to CD, TUNER, or TAPE to select the desired au- dio source.
6.Select the desired radio station, or load the CD or cassette tape you want the System 746 to play when it turns itself on.
Note: If you selected a cassette tape, be sure to press PLAY and PAUSE on the deck.
7.Adjust the volume and set E- BASS for the desired sound.
Notes:
•If you selected a cassette tape, be sure to release PAUSE on the deck after you turn off the system.
•To cancel the
SETTING THE SLEEP TIMER
You can set the system to play up to 90 minutes, then automatically turn off.
Note: You cannot use the
1.With power turned on slide
FUNCTION to CD, TUNER, or
TAPE to select the desired audio source.
2.Tune to the desired AM or FM radio station, or start the CD or tape.
3.To turn on the sleep timer, press and release SLEEP on the re- mote control. You see:
illustration
13
