Optimus SYSTEM 746 Cassette Deck Operation, Loading A Cassette Tape, Playing A Cassette Tape

13-1294.fm Page 22 Wednesday, July 14, 1999 7:01 PM

CASSETTE DECK OPERATION

The system has one cassette deck for cassette tape playback and re- cording. The deck has a full-release auto-stop system to protect tapes and prevent pinch roller damage. When a tape reaches the end of a side, the tape mechanism automati- cally stops and releases the tape.

3.Insert the cassette tape into the tape guides in the compartment door, with its exposed tape edge facing down, the side you want play facing you, and its full reel to the left.

4.Close the compartment door.

LOADING A CASSETTE TAPE

1.Take up any slack in the tape by turning the cassette’s hub with a pencil. If you do not remove ex- cess slack, the tape might be- come tangled in the record/ playback mechanism. Avoid touching the tape.

illustration

2.Press (Stop/Eject) to open the cassette compartment door.

illustration

PLAYING A CASSETTE TAPE

After loading a cassette tape, follow these steps to play it.

1.Slide FUNCTION to TAPE. TAPE appears.

2.Press (Play). The tape plays until it reaches the end of the side, then it automatically stops.

illustration

Notes:

•To temporarily stop playback,

press (Pause). Press again to continue playback.

illustration

22