8.Programmed play automatically stops at the end of the last pro- grammed track. To stop the CD player at any time during pro- grammed play, press STOP 
. The CD’s total number of tracks and playing time appear.
Note: To replace a programmed track, press PROGRAM/MEMORY (or PROG on the remote control) until the posi- tion number of the track you want to replace appears. Then repeat Steps 3 and 4 to select and store the new track.
Reviewing the Programmed Sequence
While play is stopped, repeatedly press PROGRAM/MEMORY (or PROG on the remote control) to review the programmed sequence.
Erasing the Programmed Sequence
You can do either of the following to erase a programmed sequence:
•Press PROGRAM/MEMORY (or
PROG on the remote control) then
STOP 
before or after pro- grammed play.
•Press OPEN before or after pro- grammed play.
CD CARE TIPS
Even though a compact disc is very durable, treat the CD surface with care. We recommend the following precautions:
•Do not place anything but a CD in the disc tray. This can damage the drive mechanism.
•Do not write on either side of the CD, particularly the
•Do not store CDs in high- temperature,
•Keep CDs dry. A water drop can act as a lens and affect the laser beam’s focus.
•Always handle a CD by the edges to avoid fingerprints and always keep it in its protective case or sleeve when not in use. Finger- prints and scratches on the CD’s surface can prevent the laser beam from correctly reading the digital information. To clean the CD surface, use a CD cleaner kit (such as Cat. No.
21
