AUTOMATIC TUNING
You can use automatic tuning to quickly move up or down to the next available station in your area.
Hold down TUNING 
or 
(or TUNING 
and 
on the remote con- trol) for about 1 second. The tuner automatically moves up or down the band and stops when it finds the next active station.
MEMORY TUNING
You can store up to 30 radio stations in memory.
Note: You can assign one frequency to each memory location. When you assign another frequency to the same memory location, the new fre- quency replaces the old one.
Storing Stations in Memory Manually
1.After tuning to the station you want to store, press MEMORY.
MEMORY appears and PRO- GRAM flashes.
2.While PROGRAM flashes, press
PRESET DOWN 
or UP 
to se- lect a memory location number.
illustration
16
3.Press MEMORY again to store the station in the memory loca- tion.
Note: If MEMORY disappears be- fore you store the station, start again from Step 1.
Storing Stations in Memory Automatically
To have the system automatically store the first 30 active FM and AM frequencies it finds, hold down MEM- ORY for about 3 seconds. MEMORY and each memory location number flash. The system tunes FM frequen- cies first, then AM. When storing is complete, all display indicators stop flashing and the system automatical- ly tunes to the frequency stored in memory location 01.
Selecting Stations Stored in Memory
To recall a preset station, press
PRESET DOWN 
or UP 
until the
desired frequency appears.
