Grizzly G0489 owner manual Inventory, Box 1 Figures 4 Qty

Inventory

After all the parts have been removed from the two boxes, you should have the following items:

Box 1: (Figures 4 & 5)		Qty
A.	Metalworking Sander	1
B.	Spark Trap	1
C.	Eye Shield	1
D.	Rest	1
	Hardware Bag (not shown)	1
	— Hex Bolt M12-1.75 X 30 (Base)	1
	— Hex Nut M12-1.75 (Base)	1
	— Flat Washers (Base)	2
	— Sleeve	1
	— Cap Screw M5-.8 x 50 (Eye Shield)	1
	— Angle Adjustment Lever	1
	— Rest Lever	1
	— Square Nut	1

A

BC

D

Figure 4. Model G0489 Inventory.

G0489 Metalworking Sander

E. Base 1

E

Figure 5. Model G0489 Base.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed on the machine. Check these locations before assuming that any items from the inventory list are miss- ing.

-11-