Manuals / Grizzly / Power Tools / Power Hammer

Grizzly G0513X2B manual Additional Safety for Bandsaws

Models: G0513X2B

1 28
Download 28 pages 43.5 Kb
Page 6
Image 6

Additional Safety for Bandsaws

BLADE CONDITION. Do not operate with dull, cracked or badly worn blade. Dull blades require more effort to perform the cut and increase the risk of kickback. Inspect blades for cracks and missing teeth before each use.

HAND PLACEMENT. Never position fingers or hands in line with the blade. If the workpiece or your hands slip, serious personal injury could occur.

WORKPIECE MATERIAL. This machine is intended for cutting natural and man-made wood products, and laminate covered wood products. This machine is NOT designed to cut metal, glass, stone, tile, etc.

BLADE REPLACEMENT. To avoid mishaps that could result in operator injury, make sure the blade teeth face down toward the table and the blade is properly tensioned and tracked before operating.

BLADE SPEED. Moving the workpiece against a blade that is not at full speed could cause the blade to grab the workpiece and draw the opera- tor's hands into the blade. Always allow the blade to come to full speed before starting the cut.

GUARDS. The blade guard protects the operator from the moving bandsaw blade. ONLY operate this bandsaw with the blade guard in the proper position.

CUTTING TECHNIQUES. Plan your operation so the blade always cuts to the outside of the workpiece. DO NOT back the workpiece away from the blade while the bandsaw is running, which could cause kickback and personal injuries. If you need to back the workpiece out, turn the bandsaw OFF and wait for the blade to come to a complete stop. DO NOT twist or put excessive stress on the blade that could damage it.

LEAVING WORK AREA. Never leave a machine running unattended. Allow the bandsaw to come to a complete stop and use the padlock to disable the machine before you leave it unattended.

FEED RATE. To avoid the risk of the workpiece slipping and causing operator injury, always feed stock evenly and smoothly. DO NOT force or twist the blade while cutting, especially when sawing small curves.

SMALL WORKPIECE HANDLING. If your hands slip while holding small workpieces with your fin- gers during a cut, amputation or laceration injuries could occur. Always support/feed the workpiece with push sticks, jig, vise, or some type of clamp- ing fixture.

BLADE CONTROL. To avoid serious personal injury, DO NOT attempt to stop or slow the blade with your hand or the workpiece. Allow the blade to stop on its own.

Like all machinery there is potential danger when operating this machine. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to decrease the risk of operator injury. If normal safety pre- cautions are overlooked or ignored, seri- ous personal injury may occur.

No list of safety guidelines can be com- plete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equip- ment, or poor work results.

-6-

Model G0513X2B (Mfg. Since 5/11)

Page 5 Page 7
Page 6
Image 6
Grizzly G0513X2B manual Additional Safety for Bandsaws
Page 5 Page 7

G0513X2B specifications

The Grizzly G0513X2B is a powerful and versatile bandsaw that caters to the needs of both professional woodworkers and hobbyists. Known for its robust construction and cutting capabilities, this machine is a staple in workshops around the world.

One of the standout features of the G0513X2B is its impressive 2 HP motor, which provides ample power to tackle a variety of cutting tasks. The motor is designed to operate on both 120V and 240V power, giving users flexibility based on their workshop setup. With a maximum cutting height of 12 inches and a maximum cutting width of 16 inches, this bandsaw can accommodate larger workpieces, making it ideal for resawing lumber, cutting curves, and creating intricate designs.

The G0513X2B is equipped with an impressive 14-inch resaw capacity, thanks to its high fence and superior blade design. The precision-ground cast iron table provides a stable support base, ensuring that users can make accurate and repeatable cuts. Additionally, the table tilts from 0 to 45 degrees, which further enhances its versatility for bevel cuts.

Another notable technology in the Grizzly G0513X2B is its ball-bearing blade guides. These guides promote smoother operation and improve precision while significantly reducing friction, which can extend the life of the blade. The oversized upper and lower blade wheels are also a key feature, as they enhance the stability of the blade and reduce vibration during operation.

The bandsaw also includes an easy-to-use tension adjustment mechanism, which allows for quick changes of the blade tension based on the material and specific cutting needs. This feature is complemented by an integrated rack-and-pinion guide system, facilitating smooth and precise adjustments to the cutting height and angle.

Safety is a paramount concern in any woodworking environment, and the G0513X2B does not disappoint. It is equipped with a safety blade guard that can be easily adjusted, ensuring that users maintain a safe distance from the blade during operation. The design also incorporates a foot brake that quickly halts the blade upon release of the power switch, adding an extra layer of safety.

In conclusion, the Grizzly G0513X2B stands out with its robust motor, high resaw capacity, and precision features. It's an exceptional choice for anyone looking to enhance their woodworking capabilities with a reliable and efficient bandsaw.