(Replaces Inventory
on Page 17)
I]Z[daadl^c\^hVYZhXg^ei^dcd[i]ZbV^cXdbed" cZcihh]^eeZYl^i]ndjgbVX]^cZ#AVni]ZXdbed" cZcihdjiid^ckZcidgni]Zb#
>[ Vcn cdc"egdeg^ZiVgn eVgih VgZ b^hh^c\ Z#\# V cji dg V lVh]Zg! lZ l^aa \aVYan gZeaVXZ i]Zb0 dg [dgi]ZhV`Zd[ZmeZY^ZcXn!gZeaVXZbZcihXVcWZ dWiV^cZYVindjgadXVa]VgYlVgZhidgZ#
Crate Contents (Figure 2): | Qty | |
A. | Bandsaw (not shown) | 1 |
B. | Table w/Table Insert | 1 |
C. | Miter Gauge | 1 |
D. | Resaw Fence | 1 |
E. | Front Square Rail | 1 |
F. | Fence Assembly | 1 |
G. | Guide Post Handwheel | 1 |
B |
|
C |
|
| D |
G |
|
F | E |
Figure 2. G0513X2B inventory. |
|
Hardware and Tools: | Qty | |
• Eye Bolt | 1 | |
• Hex Bolts | 4 | |
• Flat Washers 8mm (Table, Fence, Rail) | 8 | |
• Lock Washers 8mm (Table, Rail) | 5 | |
• Lock Washers 6mm (Rail) | 3 | |
• Flat Washers 6mm (Rail) | 3 | |
• Cap Screws | 3 | |
• Cap Screw | 1 | |
• Knobs | 2 | |
• Hex Bolt | 1 | |
• Hex Nuts | 2 | |
• Lock Handle | 1 | |
• | Moving Plate (Fence) | 1 |
• | Table Pin | 1 |
• | Rail Plates | 3 |
• Hex Wrench 5mm & 8mm | 1 Ea | |
• Open End Wrench 10 x 13mm | 1 |
NOTICE
If you cannot find an item on this list, check the mounting location on the machine or the packaging materials. Sometimes parts are
Model G0513X2B (Mfg. Since 5/11) |