Manuals / Grizzly / Power Tools / Power Hammer

Grizzly G0513X2B manual Replaces Table on, Replaces Positive Stop on, Replaces Installing Fence on

Models: G0513X2B

1 28
Download 28 pages 43.5 Kb
Page 10
Image 10

(Replaces Table on

Page 21)

Components and Hardware Needed:

Qty

Hex Bolts M8-1.25 x 25

4

1.Follow Steps 1-3on Page 21 in the G0513X Manual. If the table insert is pre-installed, remove it now.

2.With the help of another person, lift the table onto the trunnions.

3.Secure the table to the trunnions with the four M8-1.25 x 25 hex bolts, 8mm lock washers and 8mm flat washers.

4.Follow Steps 6-9in the G0513X Manual.

(Replaces Positive Stop on Page 23)

Components and Hardware Needed:

Qty

Hex Bolts M8-1.25 x 90

1

Hex Nut M8-1.25

1

To install the positive stop:

 

1.Unlock the table tilt lock lever, tilt the table to access the positive stop bolt installation loca- tion, then lock the lever.

2.Thread the M8-1.25 hex nut halfway onto the M8-1.25 x 90 hex bolt (this is the positive stop bolt).

3.Thread the positive stop bolt into the thread- ed hole on the bandsaw body.

4.Lower the table onto the positive stop bolt.

5.Follow To Set the Positive Stop on G0513X Manual Page 24.

-10-

(Replaces Installing Fence on Page 25)

Components and Hardware Needed:

Qty

Fence Assembly

1

Front Rail

1

Rail Plates

3

Cap Screws M6-1 x 20

3

Flat Washers 6mm

3

Lock Washers 6mm

3

Cap Screw M8-1.25 x 20

1

Knobs M8-1.25 x 20

2

Flat Washers 8mm

4

Lock Washer 8mm

1

Resaw Fence

1

Lock Handle M8-1.25 x 44

1

Moving Plate

1

To install the fence:

 

1.Attach the rail plates to the front rail with the three M6-1 x 20 cap screws, 6mm lock wash- ers, and 6mm flat washers (see Figure 3).

Front Rail

Rail Plate

Flat Washer 6mm

Flat

Lock Washer 6mm

Washer

Cap Screw

8mm

Knob

M6-1 x 20

 

Cap Screw

Lock Washer

M8-1.25 x 20

8mm

Figure 3. Installing front rail onto table.

2.Attach the outer two rail plates with the round and elongated mounting holes on the outer part of the table bottom with two M8-1.25 x 20 knobs and 8mm flat washers. Attach the remaining rail plate with the round mounting holes using an M8-1.25 x 20 cap screw, 8mm lock washer and 8mm flat washer (Figure 3).

Model G0513X2B (Mfg. Since 5/11)

Page 9 Page 11
Page 10
Image 10
Grizzly G0513X2B manual Replaces Table on, Replaces Positive Stop on, Replaces Installing Fence on
Page 9 Page 11

G0513X2B specifications

The Grizzly G0513X2B is a powerful and versatile bandsaw that caters to the needs of both professional woodworkers and hobbyists. Known for its robust construction and cutting capabilities, this machine is a staple in workshops around the world.

One of the standout features of the G0513X2B is its impressive 2 HP motor, which provides ample power to tackle a variety of cutting tasks. The motor is designed to operate on both 120V and 240V power, giving users flexibility based on their workshop setup. With a maximum cutting height of 12 inches and a maximum cutting width of 16 inches, this bandsaw can accommodate larger workpieces, making it ideal for resawing lumber, cutting curves, and creating intricate designs.

The G0513X2B is equipped with an impressive 14-inch resaw capacity, thanks to its high fence and superior blade design. The precision-ground cast iron table provides a stable support base, ensuring that users can make accurate and repeatable cuts. Additionally, the table tilts from 0 to 45 degrees, which further enhances its versatility for bevel cuts.

Another notable technology in the Grizzly G0513X2B is its ball-bearing blade guides. These guides promote smoother operation and improve precision while significantly reducing friction, which can extend the life of the blade. The oversized upper and lower blade wheels are also a key feature, as they enhance the stability of the blade and reduce vibration during operation.

The bandsaw also includes an easy-to-use tension adjustment mechanism, which allows for quick changes of the blade tension based on the material and specific cutting needs. This feature is complemented by an integrated rack-and-pinion guide system, facilitating smooth and precise adjustments to the cutting height and angle.

Safety is a paramount concern in any woodworking environment, and the G0513X2B does not disappoint. It is equipped with a safety blade guard that can be easily adjusted, ensuring that users maintain a safe distance from the blade during operation. The design also incorporates a foot brake that quickly halts the blade upon release of the power switch, adding an extra layer of safety.

In conclusion, the Grizzly G0513X2B stands out with its robust motor, high resaw capacity, and precision features. It's an exceptional choice for anyone looking to enhance their woodworking capabilities with a reliable and efficient bandsaw.