-10- G0565 Adjustable Sponge Sander
Inventory
The Model G0565 Sponge Sander comes almost
entirely assembled. The remaining parts can be
found in a bag inside the cabinet. After removing
the parts from the bag, you should have the fol-
lowing items:
Hardware Bag .................................................. 1
— Hex Nut 3⁄8-16" ....................................... 4
— Flat Washer 3⁄8" ...................................... 4
— Lock Washer 3⁄8" .................................... 4
— Rubber Feet ........................................... 4
— Open End Wrench 1" ............................. 1
— Arbor Wrench 11⁄2" ................................. 1
Figure 3. Parts inventory.
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Figure 4. Working clearances.
Floor Load
The Model G0565 weighs 167 lbs. and has a
base footprint of 221⁄2" W x 19" D. Most commer-
cial floors are suitable for your machine. Some
residential floors may require additional reinforce-
ment to support both the machine and operator.
Working Clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your sponge sander. See Figure 4 for the mini-
mum working clearances of the Model G0565.
Unsupervised children and
visitors inside your shop
could cause serious per-
sonal injury to themselves.
Lock all entrances to the
shop when you are away and
DO NOT allow unsupervised
children or visitors in your
shop at any time!