Test Run

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose

clothing and long

hair

away from moving

machinery.

Before starting the machine:

1.Read this manual and make sure you under- stand Section 1: Safety on page 5.

2.Review Section 3: Circuit Requirements on page 8, and make any necessary changes.

3.Install a NEMA 6-15 220V plug. DO NOT plug the sander into the power source at this time.

4.Make sure all tools and foreign objects have been removed from the machine.

Starting the machine:

1. Wear safety glasses at all times when running the sander!

2. Remove the sanding belts as described on page 13.

3.Plug the sander into the power source.

4.Push the START button shown in Figure 5.

If any problems, unusual noises, or vibra- tions occur, immediately press the STOP button. Turn to Troubleshooting on page 25 and correct the problem before oper- ating the machine further.

If you cannot easily locate the source of the problem, unusual noise or vibration by yourself, please contact our service department at (570) 546-9663.

Power

Switch

Figure 5. Power switch.

5.If the sander seems to be running correctly, let it run for a short time to ensure that the moving parts are working properly. If any problem develops, correct it before attempt- ing to use the machine.

-12-

G0565 Adjustable Sponge Sander

Page 14
Image 14
Grizzly G0565 Test Run, Loose hair and cloth, Ing could get caught, Machinery and cause seri, Ous personal injury. Keep