Model G0747/G0748 (Mfg. Since 8/12) -17-
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
InventoryThe following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Small Item Inventory: (Figure 2) Qty
A. Front Way Cover ..........................................1
b. rear Way Cover ..........................................1
C. drawbar 7⁄16"-20 x 23
1⁄2" ...............................1
D. Ball handles ................................................3
E. Fine downfeed handwheel .........................1
F. Ball handle handles ....................................3
G. toolbox ........................................................1
H. Bottle for oil ................................................ 1
I. Belt housing safety Covers (g0747 only) .. 2
J. K nee Crank .................................................1
K. Coarse downfeed lever ..............................1
L. Closed-end Wrench 17 x 19mm.................. 1
M. phillips screwdriver #2 ................................1
N. slotted screwdriver #2 ................................1
Figure 2. small item inventory.
A B
C
e
F
d
i
hg
l
K
J
n
M