Blade Adjustment Bolt

6.Recheck the splitter alignment to the blade and to the table top. Adjust as necessary and tighten all the bolts before use. If the blade guard is properly aligned, please skip ahead to Step 13; otherwise, continue with the next step.

7.If the splitter is positioned to the left of the blade, alignment cannot be achieved by washer placement. Adjustment of the front support bracket is required. See Figure 21 for adjustment details. Loosen the 2 adjust- ment screws and move left or right.

8.If this adjustment does not allow enough movement of the splitter, remove the table and wings, and set them to one side. Be sure to note the position of the table shims. Replace them to their original position before re-attaching the table.

The table and wings represent a very heavy load. DO NOT over- exert yourself while lift- ing or moving the table and wings – get assis- tance.

The arbor bracket and motor pulley now need to be adjusted:

9.Loosen the adjustment bolt shown in Figure 23, and slowly slide the arbor bracket towards the end of the shaft. Only move the arbor bracket a distance equal to the amount of misalignment between the blade and the splitter, or a little more. You can always adjust the splitter back to the left with wash- ers.

10.Tighten the adjustment bolt securely.

G1023Z Series Heavy-Duty 10'' Table Saw

Arbor Bracket

Figure 23. Arbor bracket adjustment locations.

11.Moving the arbor bracket moves the V-belts and pulleys out of alignment, so adjustment of the motor pulley is required. Simply loosen the setscrew in the middle groove of the pul- ley, and slowly slide the pulley toward the end of the motor shaft. Once the V-belts are back in alignment, tighten the setscrew securely.

12.Recheck the guard alignment to the blade and to the table top. Adjust as necessary and tighten down all the bolts before use. If the blade guard is properly aligned, re-attach the table, making sure there is adequate blade clearance through all blade adjustments.

13.Adjust the blade to 45¡. Raise and lower it through the full range. Re-adjust the blade to 90¡, then raise and lower it through the full range. There should be no contact between the blade, the base, the table insert, or any other part of the saw. If there is contact, repeat Steps 8-12.

-25-

G1023ZX, G1023Z, G1023ZX3 specifications

The Grizzly G1023ZX3, G1023Z, and G1023ZX are standout options in the world of table saws, known for their precision, durability, and powerful performance. Each model offers unique features and specifications that cater to the needs of both amateur woodworkers and seasoned professionals alike.

The G1023ZX3 is particularly notable for its innovative design and advanced technology. It features a 3 HP motor that ensures consistent and high-quality cuts through even the densest hardwoods. This model is equipped with a 30-inch extension table, providing ample workspace for large projects. Its heavy-duty cast iron construction not only enhances stability but also minimizes vibrations, promoting accuracy during operation. The G1023ZX3 also includes a precision-ground table and a clear polycarbonate blade guard, which offers visibility and safety while cutting.

The G1023Z is a slightly more compact and affordable version, though it does not compromise on performance. It still features a robust 3 HP motor, ensuring reliable power for various woodworking tasks. This model is designed with a 27-inch table and integrates a quick-release blade guard, making it easy to install and remove when necessary. The G1023Z's easy-to-use handwheel for raising and lowering the blade simplifies adjustments, making this model particularly user-friendly.

The G1023ZX is a versatile model that bridges the gap between the G1023ZX3 and G1023Z. It offers an impressive 3 HP motor and boasts a 30-inch table, just like the ZX3. The G1023ZX is equipped with a built-in mobile base that allows for easy maneuverability, which is a great advantage in workshops with limited space. This model also features a high-quality T-square style fence system that ensures precise measurements and straight cuts, catering to the needs of both novice and expert woodworkers.

All models incorporate high-quality safety features such as riving knives and anti-kickback pawls, ensuring user protection during operation. Furthermore, the durable construction and thoughtful design of these table saws allow for prolonged use, making them a worthwhile investment for anyone serious about woodworking. In conclusion, the Grizzly G1023 series, including the G1023ZX3, G1023Z, and G1023ZX, stands out for their exceptional engineering, versatility, and commitment to safety, making them ideal for achieving accurate and efficient results in woodworking projects.

Grizzly G1023ZX3 instruction manual Blade Adjustment Bolt

Models: G1023ZX G1023Z G1023ZX3