Blade Parallelism

Your table saw will give the best results if the miter slot and the rip fence are adjusted parallel to the blade. If either of these are not exactly par- allel, your cuts and your finished work will be lower in quality, but more important, this condition increases the risk of kickback. Take the time to adjust your table saw properly. A few minutes now will be time well spent.

1.Disconnect the machine from the power source!

2.Use an adjustable square to measure the distance from the miter slot to a carbide tip on the blade as shown in Figure 41. Make sure that the face of the adjustable square is even along the miter slot.

3.With the end of the adjustable square just touching the tip, lock the square in place. Now, mark the carbide tip with a magic mark- er where you made this measurement.

4.Rotate that tip to the other end of the table insert.

5.Slide the adjustable square down to the other end of the table insert, and compare the distance from the marked blade tip to the end of the adjustable square.

!

Figure 41. Adjusting blade to miter slot.

6.If the blade tip does not touch the end of the adjustable square similar to the first mea- surement, then the table will need to be adjusted.

7.To adjust the table, loosen the four bolts in the table mounting locations (see Figure 42) and slightly tap the table. Repeat Steps 1-5until satisfactory. Do not forget to tighten the table mounting bolts when finished.

Table Mount Holes

Figure 42. Table mounting bolt holes.

8.Now check to see if the blade remains paral- lel to the miter slot when tilted to 45¡.

9.Tilt the blade to 45¡ and repeat Steps 1-5. If the blade is still parallel to the miter slot, con- tinue on to the ÒMiter GaugeÓ instructions. Otherwise, continue with the next step.

10.If the blade was parallel to the miter slot at 90¡ but not at 45¡, the table will need to be shimmed with metal shim stock. The shims are placed between the table and cabinet over each of the four table mounting bolts.

Use caution and remain alert when working around the saw blade. Failure to follow this warning could result in serious personal injury or death.

G1023Z Series Heavy-Duty 10'' Table Saw

-43-

Page 44 Page 46
Page 45
Image 45
Grizzly G1023ZX3 instruction manual Blade Parallelism, Disconnect the machine from the power source
Page 44 Page 46

G1023ZX, G1023Z, G1023ZX3 specifications

The Grizzly G1023ZX3, G1023Z, and G1023ZX are standout options in the world of table saws, known for their precision, durability, and powerful performance. Each model offers unique features and specifications that cater to the needs of both amateur woodworkers and seasoned professionals alike.

The G1023ZX3 is particularly notable for its innovative design and advanced technology. It features a 3 HP motor that ensures consistent and high-quality cuts through even the densest hardwoods. This model is equipped with a 30-inch extension table, providing ample workspace for large projects. Its heavy-duty cast iron construction not only enhances stability but also minimizes vibrations, promoting accuracy during operation. The G1023ZX3 also includes a precision-ground table and a clear polycarbonate blade guard, which offers visibility and safety while cutting.

The G1023Z is a slightly more compact and affordable version, though it does not compromise on performance. It still features a robust 3 HP motor, ensuring reliable power for various woodworking tasks. This model is designed with a 27-inch table and integrates a quick-release blade guard, making it easy to install and remove when necessary. The G1023Z's easy-to-use handwheel for raising and lowering the blade simplifies adjustments, making this model particularly user-friendly.

The G1023ZX is a versatile model that bridges the gap between the G1023ZX3 and G1023Z. It offers an impressive 3 HP motor and boasts a 30-inch table, just like the ZX3. The G1023ZX is equipped with a built-in mobile base that allows for easy maneuverability, which is a great advantage in workshops with limited space. This model also features a high-quality T-square style fence system that ensures precise measurements and straight cuts, catering to the needs of both novice and expert woodworkers.

All models incorporate high-quality safety features such as riving knives and anti-kickback pawls, ensuring user protection during operation. Furthermore, the durable construction and thoughtful design of these table saws allow for prolonged use, making them a worthwhile investment for anyone serious about woodworking. In conclusion, the Grizzly G1023 series, including the G1023ZX3, G1023Z, and G1023ZX, stands out for their exceptional engineering, versatility, and commitment to safety, making them ideal for achieving accurate and efficient results in woodworking projects.
Top Page Image Contents