Ripping

A rip cut is a cut with the grain direction of the workpiece. Ripping man-made wood products like plywood is performed by cutting parallel to the longest side.

Keep the blade guard in the down position at all times. Failure to do this could result in serious personal injury or death.

To make a rip cut:

1.Set the fence to the desired width of cut on the fence rail scale.

2.Adjust the blade height so the highest saw tooth protrudes approximately 1Ú4" above the workpiece.

3.Joint one long edge of the workpiece on a jointer.

4.Set up any safety devices such as feather- boards or other anti-kickback devices.

5.With the saw disconnected from the power source, rotate the blade to make sure it does not come into contact with any of the safety devices.

6.Plug the saw into the power source, and turn on the saw and allow it to come to full speed.

7.The jointed edge of the workpiece must be slide against the fence during the cutting operation.

Stand to the left of the blade line-of-cut when ripping a board. Serious personal injury could occur if kickback results.

8.Using a push stick, feed the workpiece through the saw blade as shown in Figure 32, until the workpiece is completely past the saw blade. When a small width is to be ripped and a push stick cannot be safely put between the blade and rip fence, rip a larger piece to obtain the desired piece.

Figure 32. Ripping operation.

Turn off the saw and allow the blade to come to a complete stop before removing the cut-off piece. Failure to follow this warn- ing could result in serious personal injury

G1023Z Series Heavy-Duty 10'' Table Saw

-31-

Page 32 Page 34
Page 33
Image 33
Grizzly G1023ZX3 instruction manual Ripping operation
Page 32 Page 34

G1023ZX, G1023Z, G1023ZX3 specifications

The Grizzly G1023ZX3, G1023Z, and G1023ZX are standout options in the world of table saws, known for their precision, durability, and powerful performance. Each model offers unique features and specifications that cater to the needs of both amateur woodworkers and seasoned professionals alike.

The G1023ZX3 is particularly notable for its innovative design and advanced technology. It features a 3 HP motor that ensures consistent and high-quality cuts through even the densest hardwoods. This model is equipped with a 30-inch extension table, providing ample workspace for large projects. Its heavy-duty cast iron construction not only enhances stability but also minimizes vibrations, promoting accuracy during operation. The G1023ZX3 also includes a precision-ground table and a clear polycarbonate blade guard, which offers visibility and safety while cutting.

The G1023Z is a slightly more compact and affordable version, though it does not compromise on performance. It still features a robust 3 HP motor, ensuring reliable power for various woodworking tasks. This model is designed with a 27-inch table and integrates a quick-release blade guard, making it easy to install and remove when necessary. The G1023Z's easy-to-use handwheel for raising and lowering the blade simplifies adjustments, making this model particularly user-friendly.

The G1023ZX is a versatile model that bridges the gap between the G1023ZX3 and G1023Z. It offers an impressive 3 HP motor and boasts a 30-inch table, just like the ZX3. The G1023ZX is equipped with a built-in mobile base that allows for easy maneuverability, which is a great advantage in workshops with limited space. This model also features a high-quality T-square style fence system that ensures precise measurements and straight cuts, catering to the needs of both novice and expert woodworkers.

All models incorporate high-quality safety features such as riving knives and anti-kickback pawls, ensuring user protection during operation. Furthermore, the durable construction and thoughtful design of these table saws allow for prolonged use, making them a worthwhile investment for anyone serious about woodworking. In conclusion, the Grizzly G1023 series, including the G1023ZX3, G1023Z, and G1023ZX, stands out for their exceptional engineering, versatility, and commitment to safety, making them ideal for achieving accurate and efficient results in woodworking projects.
Top Page Image Contents