10.Affix the wide foam strip around the outside top rim of the collector, as shown in Figure 17.
Figure 17. Installing wide foam strip.
11.Trim the excess foam strip so the ends come together evenly, as shown in Figure 18.
Figure 18. Trimmed foam strip.
12.Secure the narrow foam strip around the out- side bottom rim of the collector and trim the excess, as shown in Figure 19.
Collector Hooks
Narrow Foam Strip
Figure 19. Trimmed foam strip and collector
hook locations.
13.G0562Z/G0562ZP only:
a.Install the canister handle onto the top of the canister filter by tightening the bolt against the flat of the shaft (see Figure 20).
Flat