SECTION 5: OPERATIONS
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
Do NOT put hands or small objects near inlet openings during opera- tion. Objects sucked into the inlet will meet with the impeller blade. Failure to heed this warning could result in property damage or per- sonal injury.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
General
Operating the Model G0562Z/G0562ZP/G1030Z2/ G1030Z2P is simple and straightforward. Turn the dust collector ON, then turn the machine ON. When you are finished with the machine opera- tion, turn OFF the machine, then turn OFF the dust collector.
Blast gates can be used at the start of each branch line to control the air flow from the woodworking machine to the dust collector. If a machine is not being used, keep the blast gate closed to maintain higher levels of efficiency throughout the system.
Machine Storage
When the dust collector is not in use, unplug the power cord from the power source. Place the cord away from potential damage sources, such as high traffic areas, sharp objects, heat sources, harsh chemicals, water, damp areas, etc.
Model G0562Z/ZP, G1030Z2/Z2P (Mfg. 11/11+)