Grizzly G1033 instruction manual Knife Setting Jig, Knife setting jig

Knife Setting Jig

The knife setting jig has been provided to make knife setting quick and easy. See Figure 6.

To assemble the knife setting jig:

1.Snap one of the E-clips over the notch on one end of the knife setting rod.

2. Slide the cast aluminum knife setting jig brackets onto the rod.

3.Snap the other E-clip onto the notch at the other end of the knife setting jig rod.

Jig Rod

E-clip

Jig Bracket

Figure 6. Knife setting jig.

Planer knives are dangerously sharp. Use extreme caution when working near cutting surfaces. Failure to exercise care while working near knives could result in severe injury.

NOTES

G1033 20" Planer -11-