MANUAL INSERT
Model G1033Z
20" 5 HP Planer
INTRODUCTION
The Model G1033Z is the same planer as the Model G1033 with the upgrade of the chromed 3-roller extension rollers and 5 HP motor.
INVENTORY | |
1. | Planer Unit | 1 |
2. | Dust Hood | 1 |
3. | Starter Switch Assembly | 1 |
4. | Table Extension Roller Assembly | 2 |
5. | Handwheel | 1 |
6. | Handwheel Handle | 1 |
6. | Hardware Bag : | |
| —Hex Bolt M6-1 x 12 | 6 |
| —Flat Washer 6mm | 6 |
| —Hex Bolt M10-1.5 x 25 | 8 |
| —Flat Washer 1/2" | 8 |
| —Knife Setting Rod | 1 |
| —Knife Setting Gauge | 2 |
| —E-Clip Ring 9mm | 4 |
| —Hex Nut M12-1.75 | 1 |
| —Flat Washer 12mm | 1 |
| —Direction Label | 1 |
| —Allen Wrench 3mm | 1 |
| —Allen Wrench 4mm | 1 |
| —Allen Wrench 5mm | 1 |
| —Allen Wrench 6mm | 1 |
| —Open End Wrench 8/10mm | 1 |
| —Open End Wrench 12/14mm | 1 |
| —Open End Wrench 17/19mm | 1 |
RECOMMENDED FOR SETUP
Figure 1. Model G1033Z.
Figure 2. Rotacator™ Precision Planer Tool is an important tool for setting up your planer for the highest quality results.
G1738—Rotacator™ Precision Planer Tool The Rotacator is a dial indicator on a magnetic base designed for quickly and accurately setting the critical tolerances needed when adjusting planers to avoid chattered cuts.
Helps adjust infeed/outfeed rollers, pressure bars, chip breakers, and bed rollers. Also a great setup tool for other machines! Accurate to 0.001". Indicator rotates 360˚.
