Operation
1.Choose the feed rate at which to operate your power feeder. The speed of the wheels will have a large impact on how well your table saw or shaper will perform.
2.Orient your power feeder depending on your job. The motor/wheel assembly can be ori- ented so that the wheels are either horizon- tal or vertical. Figure 12 and Figure 13.
3.Adjust the distance between the wheels and the table top or fence (depending on the ori- entation of the wheels). The distance should be about
4.Ensure that the power feeder position is securely locked. Also ensure that the fence is securely locked.
5.Turn on the power feeder and the tool it is mounted to. Slowly feed your workpiece into and under the wheels of the power feeder.
6.Retrieve the workpiece as it feeds out of the machine. Do not stand directly in front of or in back of the workpiece as it is feed- ing through your power tool. Stand to one side.
Figure 12.
Figure 13.
|
|
|
|
|
|
|
|
|
|
|
|
G1128/G1129 Power Feeders | |||
