Knife Setting Gauge

1.Insert the steel rod through the hole in each adjuster arm until the notches for the E-clips extend past the adjustment arms on both sides.

2.Attach the E-clips to the notches to lock adjustment arms onto the steel rod. The adjustment arms are symmetrical, so the placement is not a concern. See Figure 13.

Figure 13. Knife setting gauge.

Pedestal Switch

G1182ZX Only

Your jointer comes with a pedestal mounted mag- netic switch for safety and convenience. Simply bolt the pedestal to the two mounting holes on the back side of the stand with the supplied washers and bolts. See Figure 13A.

Figure 13A. Mounting pedestal switch to stand.

-16-

G1182 6" Series Jointers

Page 18
Image 18
Grizzly G1182HW instruction manual Knife Setting Gauge, Pedestal Switch