SECTION 4: ASSEMBLY
Fence
Most of your G1258 20'' bandsaw has been assembled at the factory. Only the fence assem- bly requires installation.
To mount the fence to the bandsaw table:
1.Mount the front rail to the table using the 2
2.Loosen the fence lock knob and slide the fence onto the rail.
DO NOT attempt any step of assembly, adjustments, or maintenance while your Model G1258 is running. Ensure that the switch is off, power is disconnected and moving parts have stopped before making adjustments. Failure to comply may result in serious personal injury.
Figure 2. Front rail in place and fence installed.
G1258 20" Bandsaw |
