![](/images/new-backgrounds/1261040/26104019x1.webp)
SECTION 2: ASSEMBLY
Beginning Assembly |
| Base/Column |
|
|
|
|
|
|
Most of the Drill Press has been
CAUTION: All
Tools Required: Only a few common tools are needed to assemble this machine. Specifically, a 14mm open end wrench, Phillips screwdriver and 3mm and 4mm Allen wrench.
1.Place the base on the floor (if G4009) or on a suitable bench (if G4008). In either case, be sure the surface is flat and stable.
2.Place the column onto the base, line up the four holes and secure with the four
Figure 3.
G4008/G4009 Drill Press |