![](/images/new-backgrounds/1261040/26104023x1.webp)
Working Table
1.Place the crank handle onto the raise/lower shaft and tighten down. Figure 6.
Figure 6.
2.Insert the
3.Thread the cap screw into the column bracket and tighten down. Figure 7.
Figure 7.
4.Place the table into the hole in the table brack- et and secure with the table lock handle.
Figure 8.
Figure 8.
5.Thread the column lock handle into the col- umn bracket. Leave the lock handle loose for now. Figure 9.
Figure 9.
G4008/G4009 Drill Press |