Grizzly G4179 owner manual Wheel Replacement, Tools Needed Qty, To replace a wheel

Wheel Replacement

Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.

If you damage one or more wheels or they are worn out, you can easily replace the wheels.

Tools Needed	Qty
Hex Wrench 5mm	1
To replace a wheel:

1.DISCONNECT THE POWER FEEDER FROM POWER!

Model G4179 1⁄2 HP Power Feeder

2.Using a 5mm hex wrench, remove the two wheel retaining cap screws (Figure 15).

Cap

Screw

Figure 15. Wheel replacement.

3.Swap the old wheel with the new.

4.Reinstall the two cap screws, and tighten in an alternating pattern until the wheel is sec- cure.

-21-