Grizzly G4179 owner manual Box Inventory Figures 3 Qty, Extra 26/34-Tooth Gears Behind Cover

Inventory

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Box Inventory (Figures 3 & 4)		Qty
A.	Power Feeder Assembly	1
B.	Extra 26/34-Tooth Gears (Behind Cover)
	...............................................................	1 Ea
C.	Elbow Joint Assembly	1
D.	Base and Column Assembly	1
E.	Crank and Leadscrew Assembly	1
F.	Base Bolt Pattern Template	1
G.	Pointed Set Screws M8-1.25 x 12	3
H.	Hex Wrench 4mm	1
I.	Handcrank Handles	2
J.	Flat Washer 13mm	1
K.	T-Handle	1
L.	Horizontal Column Assembly	1

SUFFOCATION HAZARD!

Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.

Model G4179 1⁄2 HP Power Feeder

B

A

C

Figure 3. Power feeder inventory.

D

				E
	G
F
			J
					K
		I
	H

L

Figure 4. Base inventory.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

-11-