INTRODUCTION
Foreword |
| Functional Overview |
|
|
|
|
|
|
|
|
|
|
|
|
We are proud to offer the Model G4179 1⁄2 HP Power Feeder. This machine is part of a growing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in this manual, you can expect years of
The specifications, drawings, and photographs illustrated in this manual represent the Model G4179 when the manual was prepared. However, owing to Grizzly’s policy of continuous improve- ment, changes may be made at any time with no obligation on the part of Grizzly.
For your convenience, we always keep current Grizzly manuals available on our website at www. grizzly.com. Any updates to your machine will be reflected in these manuals as soon as they are complete. Visit our site often to check for the lat- est updates to this manual!
Contact Info
We stand behind our machines. If you have any service questions, parts requests or general ques- tions about the machine, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
If you have any comments regarding this manual, please write to us at the address below:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA
This power feeder greatly simplifies repetitive operations on table saws, jointers, and shapers by automating how workpieces are fed into the cut.
Since the power feeder is typically positioned between the blade and the operator during opera- tions, the operator’s hands do not need to get near the blade when feeding the workpiece, so the danger of an accidental cutting injury is greatly reduced.
Additionally, the power feeder provides more con- sistent results than hand fed operations, because it moves the workpiece at an even speed and maintains consistent workpiece pressure against the table and fence throughout the cut.
The power feeder works by simply attaching rub- ber rollers to a motor through a series of gears designed to control the roller speed.
Since the rubber rollers must be positioned correctly to maintain even workpiece pressure against the table and fence, the power feeder is mounted on a stand that allows it to be moved and locked at an array of heights an angles within the range of the stand.
The power feeder stand is typically mounted to the desired machine by clamping it to the machine’s table, or mounting it directly into the machine’s table via drilled and tapped holes.
Model G4179 1⁄2 HP Power Feeder
