SECTION 5: OPERATIONS

Test Run

Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.

Wear a face shield dur- ing the test run and operation of this wood working lathe. Failure to do so could result in serious injury.

Once assembly is complete and adjustments are done to your satisfaction, you are ready to test run the machine.

Press the START button. Make sure that your fin- ger is poised on the STOP button, just in case there is a problem. The lathe should run smooth- ly, with little or no vibration or rubbing noises. Strange or unnatural noises should be investigat- ed and corrected before operating the machine further.

If you cannot easily locate the source of an unusual noise or vibration, contact our service department for help.

Speed Selector

The variable speed selector allows the adjust- ment of the spindle R.P.M. The lathe should only be turned ON when the speed is set at the lowest R.P.M. The lathe must be ON to adjust the speed; therefore, be sure to set the speed to the lowest R.P.M. before turning OFF the machine.

G5979 Wood Lathe

The speed control lever can be turned to one of ten fixed speeds. To set the speed:

1.Turn the lathe ON. Make sure that your finger is poised on the STOP button, just in case there is a problem. The lathe should run smoothly, with little or no vibration or rubbing noises. Strange or unnatural noises should be investigated and corrected before operat- ing the machine further. If you cannot easily locate the source of an unusual noise or vibration, contact our service department for help.

2.Pull back on the lever handle and rotate to the next higher speed as shown in Figure 16.

3.Turn the lever handle clockwise along the index plate to increase the speed and coun- terclockwise to decrease the speed.

4.Remember to turn the lever handle to the slowest R.P.M. before turning off the machine.

Remember to choose the correct speed for your particular turning project. As a gener- al rule, the larger the workpiece diameter, the slower the speed. Always start and stop at the slowest speed.

Figure 16. Adjusting spindle speed.

-17-

Page 19
Image 19
Grizzly G5979 instruction manual Operations, Test Run, Speed Selector

G5979 specifications

The Grizzly G5979 is a versatile and robust woodworking lathe designed for both professional and amateur woodworkers. Known for its durability and precision, the G5979 model stands out in the woodworking community for its innovative features and user-friendly design.

One of the main characteristics of the Grizzly G5979 is its powerful 1 HP motor, providing ample torque for turning a wide variety of wood pieces. The variable speed range, adjustable from 600 to 3200 RPM, gives users the flexibility to select the optimal speed for their specific project, whether it’s shaping delicate spindles or roughing out larger bowls.

The lathe boasts a solid cast iron construction, which not only contributes to stability during operation but also helps minimize vibrations. This ensures a smooth finish on the woodwork and allows for greater accuracy in shaping the material. Additionally, the bed of the lathe is designed to accommodate longer workpieces, making it suitable for projects of varying sizes.

Another key feature of the Grizzly G5979 is its swiveling headstock, which can be rotated 180 degrees. This functionality enhances the versatility of the lathe, enabling users to easily access different angles for intricate designs and detailed work. Enhancing this feature is an easy-to-read scale for adjustments, making it effortless for woodworkers to make precise changes.

The lathe also includes a built-in tailstock with a precision live center, allowing for secure and accurate positioning of workpieces. An easy to operate handwheel enables fine adjustments, adding to the overall convenience of the device.

The G5979 is equipped with a sturdy tool rest that can be adjusted for height and angle, facilitating smoother transitions during turning. The tool rest is designed for easy installation and removal, enhancing the lathe's operation efficiency.

Safety features of the Grizzly G5979 include a safety switch and an emergency stop button, ensuring that users can quickly halt operation in case of any unforeseen issues. Moreover, the overall design reflects a commitment to user safety and ease of use, making it an appealing choice for woodworkers at any skill level.

In summary, the Grizzly G5979 woodworking lathe represents a great blend of power, precision, and safety. Its array of features and technologies ensures that users can tackle a wide range of woodworking projects effectively. Whether you are an experienced craftsman or a beginner, the G5979 is a solid investment for any woodworking shop.