After First 50 Hours

After the first 50 working hours, or 30 days, whichever comes first, replace the oil in the motor with compressor oil (use ISO 100 or SAE 30W viscosity, non-detergent type).

Also after this initial operation period, check to make sure that all the fittings are tight. Remove the air filter foam element (See Figure 9) and rinse it out in water. Allow it to dry and reinstall.

Blow out any accumulated dirt between the cylin- der cooling fins.

Fig 9. Air filter cover and foam element.

Weekly

If the compressor is used on a regular daily basis, perform the following checks each week:

1.Rinse the air filter foam element in water.

2.Check for loose bolts or fittings.

Every 300 Hours

After every 300 hours or 3 months of regular operation, perform the following maintenance items:

1.Change compressor motor oil.

2.Rinse the air filter foam element in water.

3.Check for air leaks and correct as needed.

4.Clean cylinder head fins for proper cooling.

5.Check for loose bolts or fittings.

 

 

 

 

 

 

 

 

 

 

 

 

G8297/G8298/G8299 Air Compressors

-13-

Page 15
Image 15
Grizzly G8299, G8298, G8297 After First 50 Hours, Weekly, Every 300 Hours, Air filter cover and foam element