BEFORE YOU START
First review the contents of your cordless tool kit and familiarize yourself with the key components:
Cordless Drill
Cordless Detail Sander
Cordless Jig Saw
Saw Blade
Battery Pack
1 Hour Charger
The battery in your new cordless power tool will not be fully charged when you receive it. To maximize the storage capac- ity of the battery it should be completely discharged, then fully recharged
For optimal life span, completely discharge the battery before recharging. Follow the instructions below to charge your battery.
Battery charging with the 1 hour “Smart” charger (1 piece charger):
1.Plug the charger into an appropriate 110/120V outlet.
2.Insert the battery into the charger. The battery fits into the oval recess in only one way. Do not force the bat- tery. Insert until it locks into place.
3.The green light over the word “OFF” on the control panel should come on. If it doesn’t, make certain the wall out- let you are plugged into is working. If the outlet power is okay, the fuse inside the charger may have blown. Fuses should be replaced by a quali- fied electrical technician.
4.To begin charging, press the “SET” button. A steady red light over the word “ON” should come on indicating the battery is being charged.
5.When the battery is fully charged, the red light will go off and the unit will stop charging. Remove the battery from the charger upon completion of the charge cycle.
Never leave a battery unattend- ed while charging. While charg- ing will make the battery and charging unit warm, if it becomes hot to the touch, dis- connect the charger immediate- ly. There is a possibility of fire hazard. Have the battery and charging unit checked by a qual- ified electrical service techni- cian.
G8594 14.4V Cordless Set |
