OPERATING TIPS AND MAINTENANCE
Operating Guides and Tips
Avoid overloading the drill, sander or
jig saw. Do not apply excessive pressure to the tool while using. If the speed drops abnormally, decrease pressure immediately. When drilling, if the bit stops abrupt- ly or becomes blocked, release the trigger at once. Reverse the direction to free the drill bit.
Ensure the safety of the workplace.
Clear the work area of all parts and debris that may cause injury by flying objects. Securely fix the object to be worked on in a vise or otherwise clamp to avoid injury. Do not attempt to hold workpiece by hand.
Inspect the cordless tool before use.
Run the tool before using to ensure all parts are running smoothly and there are no abnormal sounds or sparks. If any defect is found, have unit serviced.
Match your drill speed to your torque.
Use low torque and high speeds for boring through light materials. Use low torque and low speeds for driving screws into light materials. For the highest setting, combine a low speed with the “Drill Bit” symbol on the Torque Setting Ring.
Know your work site. Take care to make sure the material being worked on is not supporting another structure, or that there are no obstructions. Before drilling or sawing. check behind walls for wires, other electri- cal hazards, or plumbing.
Use accessories properly. Use the low- est possible torque setting when dri- ving fasteners. This will increase the life span of the driving bit and pre- vent damage to the fastener.
Maintenance
Your cordless power tool will give you hun- dreds of hours of operation time before ever needing service. The electrical com- ponents of this cordless drill are not user serviceable. Repair should always be undertaken by a qualified electrical repair technician.
Keep the drill free from dirt and grease. Always store it in a dry place, preferably in the case that is supplied.
The battery will require periodic recharg- ing, and eventually replacement after it has exceeded its recharge life (approxi- mately
be recycled or disposed of properly.
Refer to the Grizzly catalog for replace- ment batteries.
Disassembly and improper reassem- bly of this device can result in electri- cal shock danger. Always have this device serviced by an qualified elec- trical repair technician. Serious injury will result.
G8594 14.4V Cordless Set
